Accessories

Chiller CW 6202

USD 2,300.00

The Chiller CW 6202 is an industrial water cooler of the refrigerator type, it has a cooling capacity of 3000 W. It is used mainly to dissipate the heat generated during the operation of the laser device, the same when passing through the refrigeration cycle generated by A compressor, is transferred to the air. The water temperature can be adjusted. Applicable to three tubes of 100 W / four tubes of 80 W CO2 laser.

RECI W6 Laser Tube – 130W / 160W

USD 1,650.00

Lenght1650 mm
Diameter80 mm
Nominal Power130 W
Maximum Power160 W
Working current30 mA
Voltage28 Kv
TechnologyCatalitic Reduction

 

Chiller CW 5202

USD 1,490.00

The Chiller CW-5200 is an industrial water cooler of the refrigerator type, has a cooling capacity of 1400 W. It is used mainly to dissipate the heat generated during the operation of the laser device, the same when passing through the refrigeration cycle generated by A compressor, is transferred to the air. The water temperature can be adjusted. Applicable to one / two CO2 laser glass tubes.

Chiller CW 5000

USD 1,345.00

The CW-5000 Chiller is an industrial water cooler of the refrigerator type, it has a cooling capacity of 800 W. It is mainly used to dissipate the heat generated during the operation of the laser device, the same when passing through the refrigeration cycle generated by A compressor, is transferred to the air. The water temperature can be adjusted. Applicable to a single CO2 laser glass tube.

RECI W4 Laser Tube – 100W / 130W

USD 1,200.00

Length1400 mm
Diameter80 mm
Nominal Power100 W
Maximum Power120 W
Working Current28 mA
Voltage20 Kv
TechnologyCatalitic Reduction

 

RECI W2 Laser Tube – 90W / 100W

USD 750.00

RECI W2 Laser Tube Specs:

Length1200 mm
Diameter80 mm
Nominal Power90 W
Maximum Power100 W
Working Current29 mA
Voltage19 Kv
TechnologyCatalitic Reduction

 

Laser Power Supply

USD 480.00USD 660.00 precio CONTADO

A Laser Power Supply is an electrical device that supplies electric power to an electrical load. The primary function of a power supply is to convert electric current from a source to the correct voltage, current, and frequency to power the load.

Chiller CW 3000

USD 650.00

The CW-3000 Chiller is a water cooler that cools by thermolysis, has compact design, low energy consumption, good protection and alarm system. It is mainly used for the heat exchange between the laser equipment and the environment. The water temperature of the cooler cw-3000 is related to the ambient temperature, so the thermostat is not adjusted manually.

II – VI Infrared Lens

USD 180.00

Plano-convex lenses are ideally suited for laser heat treating, welding, cutting, and infrared radiation collection.

TypeOptical Laser Lens
Diameter20 mm
MaterialZnSe
Focal Distance2 ” / 2.5 “
CertificationCE / ISO
Raw MaterialAmerican II-VI Infrared

 

American Laser Lens

USD 120.00

American Laser Lens are ideally suited for laser heat treating, welding, cutting, and infrared radiation collection.

TypeOptical Laser Lens
Diameter20 mm
MaterialZnSe
Focal Distance2 ” / 2.5 “
CertificationCE / ISO
Raw MaterialAmerican

Showing 1–10 of 12 results